C400 with legs, adjusted to the relax position
Close-up of the 53 mm slats and the iron frame
Close-up of the joint and the remote
C400 on a lift frame, in the low position
C400 on a lift frame, in the high position

Electric adjustable bed C400

Five motorized sections and 53 mm beech slats, with two 118 mm slats in the lumbar zone for extra rigidity. Ready for a lift frame, side rails and headboard.

  • 5adjustable sections
  • 6.500Nmotor with wireless remote
  • 53mmbeech slats
  • 7cmbed base height
  • 3 years motor warranty
  • Made in Granollers (Spain)
  • Compatible with lift frame

Full specifications

Frame
60×20 mm iron tube on the outer perimeter and on the cross bars where the round legs are fitted.
Bed base height
7 cm.
Articulation
30×30 mm tube joined with polyamide joints, motorized in 5 sections (4 optional).
Motor
6,500 N with wireless remote. 3-year warranty.
Slats
Natural beech plywood, 53 mm, flexible, gray melamine finish.
Lumbar zone
Two 118 mm slats for extra rigidity.
Slat fixing
PELD plastic slat holders, solid and silent, fixed to the inner frame.
Tilt
2/5.
Maximum weight
100 kg.
Options
Lift frame, side rails, matching headboard and footboard. The lift frame, headboard and footboard must be ordered with the bed.
Warranty
3 years.

Five sections that move independently

Head, upper body, thigh and leg sections move around the seat section, which stays fixed. All with a single wireless remote. Also available with 4 sections to order.

The 5 sections, seen from the side

  1. Head1
  2. Back2
  3. Seat3
  4. Thigh4
  5. Legs5

The seat section (3) is fixed; the others move up and down.

  • Relax

    Upper body and knees raised. For reading, watching TV or resting without lying fully flat.

  • Circulation

    Legs above the upper body, with the back almost flat.

  • Sitting up

    Upper body almost upright: helps the user sit up and get out of bed.

  • Full elevation

    Head and legs raised at the same time, using the full motor stroke.

From bedroom bed to care bed

The same bed adapts as the user's needs change.

C400 with lift frame in the low positionC400 with lift frame in the high position

Lift frame

Raises and lowers the whole bed with the same remote. Lower for getting into bed safely; higher so the caregiver can work without straining their back.

  • Gray melamine headboard and footboard

    Headboard and footboard

    Matching the bed. Ordered with the bed.

  • Side rail

    Side rails

    Metal side rails, for added safety.

  • Set of legs with casters

    Legs

    Round: beech or wengé wood, adjustable or with casters.

Adjustable bed comparison

C400This modelA400MTC400ELEMENT PLUS
Sections5 (4 optional)45 (4 optional)5 (4 optional)
Surface53 mm slats120 mm slats38 mm slatsFlex plates on HYTREL supports
Lumbar zone2 slats of 118 mm-Double slat, adjustable firmnessDual firmness by zone
Tilt
Bed base height7 cm7 cm8 cm10 cm
Lift frameYesYesYesYes
Side railsYesYesYesYes

We'll email it to you

Leave your email and we'll send you the download link. If you run a shop, we'll also tell you about our trade terms.