A400 with legs, adjusted to the relax position
Close-up of the wide 120 mm slats
Close-up of the joint and the remote
A400 on a lift frame, in the high position
A400 with lift frame, side rail, headboard and footboard

Electric adjustable bed A400

Four motorized sections and wide 120 mm beech slats. Ready for a lift frame, side rails and matching headboard and footboard.

  • 4adjustable sections
  • 6.500Nmotor with wireless remote
  • 120mmbeech slats
  • 7cmbed base height
  • 3 years motor warranty
  • Made in Granollers (Spain)
  • Compatible with lift frame

Full specifications

Frame
60×20 mm iron tube on the outer perimeter and on the cross bars where the round legs are fitted.
Bed base height
7 cm.
Articulation
30×30 mm tube joined with polyamide joints, motorized in 4 sections.
Motor
6,500 N with wireless remote. 3-year warranty.
Slats
Natural beech plywood, 120 mm, flexible, gray melamine finish.
Slat fixing
PELD plastic slat holders, solid and silent, fixed to the inner frame.
Tilt
1/5.
Maximum weight
100 kg.
Options
Lift frame, side rails, matching headboard and footboard. The lift frame, headboard and footboard must be ordered with the bed.
Warranty
3 years.

Four sections, one remote

Backrest, thigh and leg sections move around the seat section, which stays fixed. All with a single wireless remote.

The 4 sections, seen from the side

  1. Backrest1
  2. Seat2
  3. Thigh3
  4. Legs4

The seat section (2) is fixed; the others move up and down.

  • Relax

    Upper body and knees raised. For reading, watching TV or resting without lying fully flat.

  • Circulation

    Legs above the upper body, with the back almost flat.

  • Sitting up

    Upper body almost upright: helps the user sit up and get out of bed.

  • Full elevation

    Head and legs raised at the same time, using the full motor stroke.

From bedroom bed to care bed

The same bed adapts as the user's needs change.

A400 with lift frame in the low positionA400 with lift frame in the high position

Lift frame

Raises and lowers the whole bed with the same remote. Lower for getting into bed safely; higher so the caregiver can work without straining their back.

69 cmheight from the floor to the bed base
WidthLowHigh
80 and 90 cm41 cm69 cm
105 cm45 cm73 cm
  • Gray melamine headboard and footboard

    Headboard and footboard

    Matching the bed. Ordered with the bed.

  • Side rail

    Side rails

    Metal side rails, for added safety.

  • Set of legs with casters

    Legs

    Round: beech or wengé wood, adjustable or with casters.

Adjustable bed comparison

A400This modelC400MTC400ELEMENT PLUS
Sections45 (4 optional)5 (4 optional)5 (4 optional)
Surface120 mm slats53 mm slats38 mm slatsFlex plates on HYTREL supports
Lumbar zone-2 slats of 118 mmDouble slat, adjustable firmnessDual firmness by zone
Tilt
Bed base height7 cm7 cm8 cm10 cm
Lift frameYesYesYesYes
Side railsYesYesYesYes

We'll email it to you

Leave your email and we'll send you the download link. If you run a shop, we'll also tell you about our trade terms.