MTC700 with legs, backrest raised
Close-up of the 38 mm slats and the foot ratchet
Close-up of the lumbar zone with double slats and firmness adjusters

Manual adjustable bed MTC700

The most complete manual model in the range: 38 mm beech slats, twice as many slats in the lumbar zone with adjustable firmness, and tilting BEDS rubber holders.

  • 3hand-adjusted sections
  • 38mmbeech slats
  • 4/5slat tilt
  • 8cmbed base height
  • 3 years warranty
  • Made in Granollers (Spain)

Full specifications

Frame
60×20 mm iron tube on the outer perimeter and on the cross bars where the round legs are fitted.
Bed base height
8 cm.
Articulation
3 sections in 30×30 mm tube joined with polyamide joints. Manual adjustment at head and foot, with a ratchet system.
Slats
Natural beech plywood, 38 mm, flexible, gray melamine finish.
Lumbar zone
Twice as many slats. Firmness adjustable with the firmness adjusters: outward for firmer, inward for softer.
Slat fixing
BEDS rubber holders that let the slats tilt according to pressure. High resilience over time.
Tilt
4/5.
Options
Side rails, matching headboard and footboard. The headboard and footboard must be ordered with the bed.
Warranty
3 years.

Three sections adjusted by hand

No motor or remote: the head and foot sections are raised by hand with a ratchet system.

The 3 sections, seen from the side

  1. Backrest1
  2. Seat2
  3. Feet3

The seat section (2) is fixed; the others move up and down.

  • Relax

    Head and feet slightly raised. For reading or resting without lying fully flat.

  • Circulation

    Feet above the upper body, with the back almost flat.

  • Sitting up

    Backrest raised: helps the user sit up in bed.

  • Full elevation

    Head and feet raised at the same time.

A lumbar zone with firmness on demand

Where the hips rest, the MTC700 has twice as many slats. With the firmness adjusters outward the zone is firmer; inward, softer.

  • 38 mm beech slats
  • Firmness adjusters
Lumbar zone: double slats
HeadFeet

Ready to equip

Accepts side rails and matching headboard and footboard.

  • Gray melamine headboard and footboard

    Headboard and footboard

    Matching the bed. Ordered with the bed.

  • Side rail

    Side rails

    Metal side rails, for added safety.

  • Set of legs with casters

    Legs

    Round: beech or wengé wood, adjustable or with casters.

Manual adjustable bed comparison

MTC700This modelC700A700MTP700
Sections3, by hand3, by hand3, by hand3, by hand
Slat38 mm53 mm120 mm38 mm in blocks of three
Lumbar zoneDouble slat, adjustable firmness3 slats of 118 mm--
Slat fixingBEDS rubber holdersPELD holdersPELD holdersPELD holders
Tilt
Bed base height8 cm7 cm7 cm7 cm

We'll email it to you

Leave your email and we'll send you the download link. If you run a shop, we'll also tell you about our trade terms.