C700 with legs, backrest raised
Close-up of the 53 mm slats and the foot ratchet
Close-up of the 118 mm slats in the lumbar zone

Manual adjustable bed C700

Three-section manual adjustable bed: head and foot sections are raised by hand with a ratchet system. 53 mm beech slats and three 118 mm slats in the lumbar zone.

  • 3hand-adjusted sections
  • 53mmbeech slats
  • 2/5slat tilt
  • 7cmbed base height
  • 3 years warranty
  • Made in Granollers (Spain)

Full specifications

Frame
60×20 mm iron tube on the outer perimeter and on the cross bars where the round legs are fitted.
Bed base height
7 cm.
Articulation
3 sections in 30×30 mm tube joined with polyamide joints. Manual adjustment at head and foot, with a ratchet system.
Slats
Natural beech plywood, 53 mm, flexible, gray melamine finish.
Lumbar zone
Three 118 mm slats for extra rigidity.
Slat fixing
PELD plastic slat holders, solid and silent, fixed to the inner frame.
Tilt
2/5.
Options
Side rails, matching headboard and footboard. The headboard and footboard must be ordered with the bed.
Warranty
3 years.

Three sections adjusted by hand

No motor or remote: the head and foot sections are raised by hand with a ratchet system.

The 3 sections, seen from the side

  1. Backrest1
  2. Seat2
  3. Feet3

The seat section (2) is fixed; the others move up and down.

  • Relax

    Head and feet slightly raised. For reading or resting without lying fully flat.

  • Circulation

    Feet above the upper body, with the back almost flat.

  • Sitting up

    Backrest raised: helps the user sit up in bed.

  • Full elevation

    Head and feet raised at the same time.

Ready to equip

Accepts side rails and matching headboard and footboard.

  • Gray melamine headboard and footboard

    Headboard and footboard

    Matching the bed. Ordered with the bed.

  • Side rail

    Side rails

    Metal side rails, for added safety.

  • Set of legs with casters

    Legs

    Round: beech or wengé wood, adjustable or with casters.

Manual adjustable bed comparison

C700This modelA700MTP700MTC700
Sections3, by hand3, by hand3, by hand3, by hand
Slat53 mm120 mm38 mm in blocks of three38 mm
Lumbar zone3 slats of 118 mm--Double slat, adjustable firmness
Slat fixingPELD holdersPELD holdersPELD holdersBEDS rubber holders
Tilt
Bed base height7 cm7 cm7 cm8 cm

We'll email it to you

Leave your email and we'll send you the download link. If you run a shop, we'll also tell you about our trade terms.