A400 on a lift frame, in the high position
A400 on a lift frame, in the low position
Close-up of the scissor lift and casters
Close-up of the wired remote
A400 with lift frame, side rail, headboard and footboard

Adjustable bed with lift frame A400

The four-section A400 on a lift frame. Two motors and a single remote to adjust the bed and raise or lower it.

  • 4adjustable sections
  • 2motors, one remote
  • 41-69cmadjustable lift frame height
  • 120mmbeech slats
  • 3 years motor warranty
  • Made in Granollers (Spain)
  • Compatible with lift frame

Full specifications

Frame
60×20 mm iron tube on the outer perimeter and on the cross bars where the round legs are fitted.
Articulation
30×30 mm tube joined with polyamide joints, motorized in 4 sections.
Motors
Dual: one built into the bed base and a linear motor for vertical lift in the frame. 3-year warranty.
Remote
A single wired remote for the bed base articulation and the lift frame.
Adjustable height
From 41 to 69 cm in 80 and 90 cm widths; from 45 to 73 cm in 105 cm.
Slats
Natural beech plywood, 120 mm, flexible, gray melamine finish.
Slat fixing
PELD plastic slat holders, solid and silent, fixed to the inner frame.
Tilt
1/5.
Maximum weight
100 kg.
Options
Side rails, matching headboard and footboard. The headboard and footboard must be ordered with the bed.
Ordering
Best ordered with the bed: the motor of a standard adjustable bed base is not compatible with the lift frame motor and would have to be replaced.
Warranty
3 years.

Four sections, one remote

Backrest, thigh and leg sections move around the seat section, which stays fixed. The same wired remote adjusts the bed and raises or lowers the lift frame.

The 4 sections, seen from the side

  1. Backrest1
  2. Seat2
  3. Thigh3
  4. Legs4

The seat section (2) is fixed; the others move up and down.

  • Relax

    Upper body and knees raised. For reading, watching TV or resting without lying fully flat.

  • Circulation

    Legs above the upper body, with the back almost flat.

  • Sitting up

    Upper body almost upright: helps the user sit up and get out of bed.

  • Full elevation

    Head and legs raised at the same time, using the full motor stroke.

The whole bed at the height you need

Designed for care settings and home care.

A400 with lift frame in the low positionA400 with lift frame in the high position

Lift frame

Raises the bed vertically. Lower for getting into bed safely; higher so the caregiver can work without straining their back.

69 cmheight from the floor to the bed base
WidthLowHigh
80 and 90 cm41 cm69 cm
105 cm45 cm73 cm
  • Gray melamine headboard and footboard

    Headboard and footboard

    Matching the bed. Ordered with the bed.

  • Side rail

    Side rails

    Metal side rails, for added safety.

Adjustable bed comparison

A400 with lift frameThis modelMTC400 with lift frameA400
Sections45 (4 optional)4
Slat120 mm38 mm, double in the lumbar zone120 mm
Motors2: bed base and lift frame2: bed base and lift frame1
RemoteOne, wiredOne, wiredWireless
Height with lift frame (80 and 90 cm)41 to 69 cm43 to 71 cmWithout lift frame
Height with lift frame (105 cm)45 to 73 cm47 to 75 cmWithout lift frame
Tilt

We'll email it to you

Leave your email and we'll send you the download link. If you run a shop, we'll also tell you about our trade terms.